TONKEE

D353 engine machine / D9H track type tractor assembly 7N9543 governor & fuel injection pump drive gp.

7N9543-Governor-Fuel-Injection-Pump-Drive-GP

Price

View

D353 engine machine / D9H track type tractor assembly  7N9543 governor & fuel injection pump drive gp.

Select the number of specifications

Please check the product information you want!

Product Detail

Fuel Pump
Specifition for 7N9543 Fuel Pump assembly:
Assembly Part NO.: 7N9543 Fuel Pump
Media Title: 594H PIPELAYER POWER SHIFT D353 ENGINE
Section: Fuel System And Governor
For Model: D353 Engine Machine (97U), D9H Track Type Tractor (90V), 594H Pipelayer (96V)
Ref Part Number Name Qty NPR Note
- 5H4034 GASKET 2 Y -
- 2H2330 BEARING 2 Y -
- 3B4508 LOCKWASHER-ROPS MOUNTING BRACKET TO COVER ASSEMBLY 2 N LOCKWASHER-NEUTRAL CONNECTION
- 5M2894 WASHER CLIP TO TUBE ASSEMBLY (AFTERCOOLER RADIATOR INLET) 3 N 2.5MM; THICK; .098IN
- 2H4739 LOCK 1 Y -
- 5M6214 PIPE PLUG--CYLINDER BLOCK OIL PRESSURE 2 N SMALL
- 4N5074 BEARING 1 Y -
- 9M1974 WASHER PLATE TO BRACKET ASSEMBLY 3 N RH FRONT COVER; 8.8X16X2-MM THK
- 2A5328 LOCK 3 N -
- 8H7211 LOCK 2 Y -
- 1C0155 LOCK SCREW 3 Y -
- 5H8122 LOCK NUT 1 Y -
- 5H8123 LOCK (SLOTTED) 1 Y -
- 6F7172 PIN-DOWEL 1 Y -
- 3F9556 LOCKWASHER 2 N LARGE
- 9S3032 CLAMP 2 Y LARGE
- 8M8515 SEAL O RING 1 Y 32.99MM ID
- 4L7823 LOCK 2 Y -
1 4N5196 GASKET GOVERNOR 1 Y -
1 0S1594 BOLT--FASTENING OF 1V3461 PLATE ASSEM. TO THE KICKPLATE 2 N LONG; 1IN; 2.54CM
2 3H2463 DOWEL 1 Y -
2 6N1867 PINION ASSEM. 1 Y -
3 4N5077 COUPLING ASSEM. 1 Y -
3 6N1866 WASHER 1 Y -
3 8N4768 COUPLING ASSEM 1 Y -
4 5H8985 PIN 12.70mm (.50 in.) long 1 Y 12.7MM; .50IN; LG
4 6L8596 WASHER-THRUST 1 Y -
5 1A2029 BOLT 9.53mm(.375 in.) X 28.6mm(1.125 in.) long 6 N LONG; 3/8-16X1.125-IN
5 0S1618 BOLT .795 cm(.313 in.) O.D. 3 N 5/16 X 18 X 1IN
6 3B4506 LOCKWASHER--BETWEEN CASE AND REAR SUPPORT OF LOADER FRAME 24 N LOCKWASHER-CURRENT TRANSFORMER BRACKET
6 0T0489 BOLT 5.08 mm(2 in.) long 4 Y 5.08MM; LONG; 2IN
7 0L1351 BOLT--FASTENING OF 1V3461 PLATE ASSEM. TO FLOORPLATE 16 N 2.22CM; .875IN; LG
7 5H4457 GASKET DRIVE HSG 1 Y -
8 5S3780 COVER 2 Y -
8 0L1329 BOLT- 7.63 cm(3 in.) long - Location "H" 3 N BUMPER; 1/2-13X3-IN
9 2H4728 CAGE ASSEM. 1 Y -
9 0S1587 BOLT-BRACKET ASSEMBLY TO TIMING GEAR 4 N SHORT
10 2B2006 BOLT 12 cm(4.75 in.) long-Location "F" 2 N LONG; 4.75IN.; 12CM
10 7H0980 SHAFT ASSEM. 1 Y -
11 2H2247 GEAR (60 TEETH) 1 Y -
11 7H0981 SHAFT 1 Y -
12 0S1588 BOLT-PLATE AND ANGLE ASSEMBLY TO HYDRAULIC AND FUEL TANKS 3 N MARKED Y; 3/8-16X1.25-IN
12 0S1617 BOLT --USE OPEN HOLE IN COMPRESSOR BODY 2 N USE AS REQUIRED; BOLT
13 2H3494 KEY 1 Y -
13 7N8605 COVER 1 Y -
14 2H4510 WASHER 1 Y -
14 0S1591 BOLT--BETWEEN CASE AND REAR SUPPORT OF LOADER FRAME 4 N 3.81CM; LONG; 1.5IN
15 8B2468 NUT 1 Y -
15 6L8585 GEAR-GOVERNOR DRIVE 1 Y 46 TEETH
16 2H2243 WASHER 1 Y -
16 6N1664 COUPLING 1 Y -
17 6N4066 HOUSING ASSEM. 1 Y -
17 3H2417 SHIM (use as required) 1 Y -
18 4F1450 STUD 4.29 cm(1.69 in.) long 6 N -
18 5H4470 GASKET FP HSG 1 Y -
19 3H4786 FERRULE 1 Y -
20 5B1866 PLUG-CUP 1 Y -
21 2A3348 DOWEL 3 Y -
22 9F1490 LOCK NUT 2 Y -
23 1B4203 NUT .375 in.(.95 cm) diameter 6 N NUT--PRIMING PUMP TO BRACKET
24 2A3307 SEAL O RING 1 Y -
BILDID: c173989
IESCN: SEBP11640122
7N9543 GOVERNOR AND FUEL INJECTION PUMP DRIVE GROUP-PART 2 ENGINE SERIAL NO. 97U11819-UP
Assembly 7N-9543 Fuel Pump is avaliable for 97U D353 Engine Machine, but actual situation depends on your really model / equipemt, if you have any questions about 7N9543 will be correctly installed or not, please contact our online tech-support.
About
Reference Source: 7N-9543 Fuel Pump also avaliable for these model / assembly:
  • D353 Engine Machine (97U) Engine Arrangement 7N3242 ENGINE AR
    7N3242 BASIC ENGINE ARRANGEMENT-PART 2 D353 ENGINE SERIAL NO. 97U7922-UP. NOTE: WHEN ORDERING PARTS GIVE ARRANGEMENT NUMBER & SERIAL NUMBER
  • D353 Engine Machine (97U) Engine Arrangement 7N3243 ENGINE AR
    7N3243 ENGINE ARRANGEMENT-PART 2 D353 ENGINE SERIAL NO. 97U7922-UP. NOTE: WHEN ORDERING PARTS GIVE ENGINE ARRANGEMENT AND SERIAL NUMBER
The above list means 7N9543 GOVERNOR & FUEL INJECTION PUMP DRIVE GP. suitable for these model / assembly, items are listed in the reference list according to the parts EPC , any issue please contact our online tech-support.

No comment

Product Detail
Fuel Pump
Specifition for 7N9543 Fuel Pump assembly:
Assembly Part NO.: 7N9543 Fuel Pump
Media Title: 594H PIPELAYER POWER SHIFT D353 ENGINE
Section: Fuel System And Governor
For Model: D353 Engine Machine (97U), D9H Track Type Tractor (90V), 594H Pipelayer (96V)
Ref Part Number Name Qty NPR Note
- 5H4034 GASKET 2 Y -
- 2H2330 BEARING 2 Y -
- 3B4508 LOCKWASHER-ROPS MOUNTING BRACKET TO COVER ASSEMBLY 2 N LOCKWASHER-NEUTRAL CONNECTION
- 5M2894 WASHER CLIP TO TUBE ASSEMBLY (AFTERCOOLER RADIATOR INLET) 3 N 2.5MM; THICK; .098IN
- 2H4739 LOCK 1 Y -
- 5M6214 PIPE PLUG--CYLINDER BLOCK OIL PRESSURE 2 N SMALL
- 4N5074 BEARING 1 Y -
- 9M1974 WASHER PLATE TO BRACKET ASSEMBLY 3 N RH FRONT COVER; 8.8X16X2-MM THK
- 2A5328 LOCK 3 N -
- 8H7211 LOCK 2 Y -
- 1C0155 LOCK SCREW 3 Y -
- 5H8122 LOCK NUT 1 Y -
- 5H8123 LOCK (SLOTTED) 1 Y -
- 6F7172 PIN-DOWEL 1 Y -
- 3F9556 LOCKWASHER 2 N LARGE
- 9S3032 CLAMP 2 Y LARGE
- 8M8515 SEAL O RING 1 Y 32.99MM ID
- 4L7823 LOCK 2 Y -
1 4N5196 GASKET GOVERNOR 1 Y -
1 0S1594 BOLT--FASTENING OF 1V3461 PLATE ASSEM. TO THE KICKPLATE 2 N LONG; 1IN; 2.54CM
2 3H2463 DOWEL 1 Y -
2 6N1867 PINION ASSEM. 1 Y -
3 4N5077 COUPLING ASSEM. 1 Y -
3 6N1866 WASHER 1 Y -
3 8N4768 COUPLING ASSEM 1 Y -
4 5H8985 PIN 12.70mm (.50 in.) long 1 Y 12.7MM; .50IN; LG
4 6L8596 WASHER-THRUST 1 Y -
5 1A2029 BOLT 9.53mm(.375 in.) X 28.6mm(1.125 in.) long 6 N LONG; 3/8-16X1.125-IN
5 0S1618 BOLT .795 cm(.313 in.) O.D. 3 N 5/16 X 18 X 1IN
6 3B4506 LOCKWASHER--BETWEEN CASE AND REAR SUPPORT OF LOADER FRAME 24 N LOCKWASHER-CURRENT TRANSFORMER BRACKET
6 0T0489 BOLT 5.08 mm(2 in.) long 4 Y 5.08MM; LONG; 2IN
7 0L1351 BOLT--FASTENING OF 1V3461 PLATE ASSEM. TO FLOORPLATE 16 N 2.22CM; .875IN; LG
7 5H4457 GASKET DRIVE HSG 1 Y -
8 5S3780 COVER 2 Y -
8 0L1329 BOLT- 7.63 cm(3 in.) long - Location "H" 3 N BUMPER; 1/2-13X3-IN
9 2H4728 CAGE ASSEM. 1 Y -
9 0S1587 BOLT-BRACKET ASSEMBLY TO TIMING GEAR 4 N SHORT
10 2B2006 BOLT 12 cm(4.75 in.) long-Location "F" 2 N LONG; 4.75IN.; 12CM
10 7H0980 SHAFT ASSEM. 1 Y -
11 2H2247 GEAR (60 TEETH) 1 Y -
11 7H0981 SHAFT 1 Y -
12 0S1588 BOLT-PLATE AND ANGLE ASSEMBLY TO HYDRAULIC AND FUEL TANKS 3 N MARKED Y; 3/8-16X1.25-IN
12 0S1617 BOLT --USE OPEN HOLE IN COMPRESSOR BODY 2 N USE AS REQUIRED; BOLT
13 2H3494 KEY 1 Y -
13 7N8605 COVER 1 Y -
14 2H4510 WASHER 1 Y -
14 0S1591 BOLT--BETWEEN CASE AND REAR SUPPORT OF LOADER FRAME 4 N 3.81CM; LONG; 1.5IN
15 8B2468 NUT 1 Y -
15 6L8585 GEAR-GOVERNOR DRIVE 1 Y 46 TEETH
16 2H2243 WASHER 1 Y -
16 6N1664 COUPLING 1 Y -
17 6N4066 HOUSING ASSEM. 1 Y -
17 3H2417 SHIM (use as required) 1 Y -
18 4F1450 STUD 4.29 cm(1.69 in.) long 6 N -
18 5H4470 GASKET FP HSG 1 Y -
19 3H4786 FERRULE 1 Y -
20 5B1866 PLUG-CUP 1 Y -
21 2A3348 DOWEL 3 Y -
22 9F1490 LOCK NUT 2 Y -
23 1B4203 NUT .375 in.(.95 cm) diameter 6 N NUT--PRIMING PUMP TO BRACKET
24 2A3307 SEAL O RING 1 Y -
BILDID: c173989
IESCN: SEBP11640122
7N9543 GOVERNOR AND FUEL INJECTION PUMP DRIVE GROUP-PART 2 ENGINE SERIAL NO. 97U11819-UP
Assembly 7N-9543 Fuel Pump is avaliable for 97U D353 Engine Machine, but actual situation depends on your really model / equipemt, if you have any questions about 7N9543 will be correctly installed or not, please contact our online tech-support.
About
Reference Source: 7N-9543 Fuel Pump also avaliable for these model / assembly:
  • D353 Engine Machine (97U) Engine Arrangement 7N3242 ENGINE AR
    7N3242 BASIC ENGINE ARRANGEMENT-PART 2 D353 ENGINE SERIAL NO. 97U7922-UP. NOTE: WHEN ORDERING PARTS GIVE ARRANGEMENT NUMBER & SERIAL NUMBER
  • D353 Engine Machine (97U) Engine Arrangement 7N3243 ENGINE AR
    7N3243 ENGINE ARRANGEMENT-PART 2 D353 ENGINE SERIAL NO. 97U7922-UP. NOTE: WHEN ORDERING PARTS GIVE ENGINE ARRANGEMENT AND SERIAL NUMBER
The above list means 7N9543 GOVERNOR & FUEL INJECTION PUMP DRIVE GP. suitable for these model / assembly, items are listed in the reference list according to the parts EPC , any issue please contact our online tech-support.
D353 engine machine / D9H track type tractor assembly 7N9543 governor & fuel injection pump drive gp.
7N9543-Governor-Fuel-Injection-Pump-Drive-GP
Long press to look detail
Long by picture save/share
INQUIRY

Request Quote MORE+
  • name *

  • Email *

  • WhatsApp *

  • Message

  • Submit

enquiry content:


You have no items to require

Add Successfully

D353 engine machine / D9H track type tractor assembly 7N9543 governor & fuel injection pump drive gp.

Add to Inquiry
INQUIRY

Request Quote MORE+
  • name *

  • Email *

  • WhatsApp *

  • Message

  • Submit

enquiry content:


You have no items to require

Add Successfully

You may also like

图片展示

(Any references to trademarks, names, descriptions, numbers, and symbols on our website are utilized for reference purposes only. All trademarks pertaining to original equipment manufacturers are duly registered trademarks of the respective original equipment manufacturers. Our website explicitly disclaims any direct association or affiliation with the manufacturers listed. The use of manufacturers' names and descriptions is strictly for reference purposes and does not imply any endorsement or sponsorship.) © 2024 TONKEE MACHINERY

添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了